|
Drawmer MC2.1 立体声控制器
DRAWMER MC2.1监听控制器特点:
超低噪声和透明的电路设计
内部电压选择开关线性电源
三个平衡立体声扬声器输出,外加一个专用的单声道扬声器/低音扬声器输出
所有的输出都有单独的L / R单元,以提供完整的控制电平匹配
所有扬声器输出定时继电器保护,防止电源up/down重击
四个输入:Neutrik XLR, Neutrik XLR/COMBI插口, phono/3.5mm 插口
两个耳机放大器与个人层面的控制
内置对讲话筒与电平控制,单声道输出插孔和耳机内部路由
坚固的钢制底盘和时尚的拉丝铝盖
可通过可选的2U安装套件安装到标准机架的设备箱上
技术规格
输入通道数 4个立体声
输出通道数 3立体声,单声道1(子),1 TB
模拟输入 2 x XLR,2×COMBI,2个RCA,1个立体声1.8“TRS
模拟输出 7个XLR,1×1/4
数字输入 无
数字输出 无
耳机 2×1/4“
对讲 有
高度 3.189“
深 8.465“
宽 10.708“
重量 5.51磅
Drawmer MC2.1 Monitor Controller Features:
Ultra-low noise and transparent circuit design
Linear power supply with low hum toroidal transformer and internal voltage selector switch
Three balanced stereo speaker outputs, plus a dedicated mono speaker/sub-woofer output
All outputs with individual L/R trims under unit to provide complete control over level matching
Timed relay protection on all speaker outputs to prevent power up/down thumps.
Comprehensive mix checking facilities including L/R Cut, Phase Reverse, Mono, Dim, Mute
Parallelled custom quad pots on main and headphone level controls for easy channel matching
Four inputs: Neutrik XLR, Neutrik XLR/JACK COMBI, and shared aux phono/3.5mm jack
Two headphone amplifiers with individual level controls
Built in talkback mic with level control, mono output jack, and internal headphone routing
Rugged steel chasis and stylish brushed aluminium cover
Can be stacked and is rack mountable (via optional 2U mounting kit)Tech Specs Number of Input Channels | 4 stereo | Number of Output Channels | 3 stereo, 1 mono (sub), 1 TB | Analog Inputs | 2 x XLR, 2 x COMBI, 2 x RCA, 1 stereo 1.8" TRS | Analog Outputs | 7 x XLR, 1 x 1/4 | Digital Inputs | None | Digital Outputs | None | Headphones | 2 x 1/4" | Talkback | Yes | Form | Desktop; rackmount via optional 2U mounting kit | Height | 3.189" | Depth | 8.465" | Width | 10.708" | Weight | 5.51 lbs.
|
|
|