双以太网端口，适合卡式以太网接口，加入的运行模式包括菊花链以及冗余前面板确认指示灯。此外，也添加了两个独立的电源与故障侦测能力，背面板带有分离的电源输入插口。每个电源的供电状态都能远程和在前面板上指示。兼顾耐用，能够安全运输，内部具有的构架品质。
D16R 16-Channel AES/EBU Interface（D16R 16-通道 AES/EBU 接口）
所有通道采样率转换
输入和输出可以在 XLR 以及 DB25
用于 DARS 或数字音频的 XLR 输入
S/PDIF 2-通道 I/O
字时钟 I/O
遥控路由和控制
Specifications
Input Sample Rate Convertors
Sample Rate Range | 32 to 216 kHz | Gain Error | -0.3dB | Dynamic Range | > 138dB (-60 dBFS method) | THD + N | < -130dB (0.00003%); 0 dBFS input | Latency | 11 to 45 samples (network and input sample rate dependent). |
Digital Performance Supported Sample Rates | 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit | Clock Sources | Internal, Word Clock, DARS, AES input 1-2, AES input 9-10 or from Dante Network Master. | External Word Clock Range | Nominal sample rate ±7.5% |
Rear Panel Connectivity AES/EBU Channel Count | 16 x 16 AES/EBU channels | Input and Output | 2 x DB-25 connectors (AES59 Combined I/O / Tascam Digital) | Alternate Input (optional DARS) | 1 x Female XLR (replaces DB-25 channels 1-2) | Alternate Output | 1 x Male XLR (duplicates DB-25 channels 1-2) |
S/PDIF Channel Count | 2 x 2 S/PDIF Channels (reduces AES/EBU input channels) | Input | 1 x RCA phono socket (replaces DB-25 channels 3-4) | Output | 1 x RCA phono socket (switchable, duplicates any DB-25 channel pair) |
Word Clock Input | 1 x BNC 75Ω port (switchable termination) | Output | 1 x BNC 75Ω port |
PSU & Network Connections PSU | 2 x IEC Inputs with retaining clips. | Network | 2 x etherCON connectors, also compatible with standard RJ45 connectors. |
Front Panel Indicators Primary PSU (A) | Green LED. Illuminates when an AC input is applied and all DC outputs are present. | Secondary PSU (B) | Green LED. Illuminates when an AC input is applied and all DC outputs are present. | Primary Network | Green LED. Indicates that a network connection is present on primary port when in redundant mode. When in Switched mode, a valid network connection at either Primary or Secondary network port will cause this LED to illuminate. | Secondary Network | Green LED. Indicates that a network connection is present on secondary port when in redundant mode. Not used in switched mode. | Sync Locked | Green LED. When unit is network slave, shows valid network lock. When unit is network master, shows lock to indicated clock source. Flashing indicates invalid external clock selected and unit has reverted to internal clock. | Sample Rate | Orange LED for each: 44.1 kHz, 48 kHz, x2, x4. | Pull Up/Down | Orange LED. Indicates unit is set to operate on a Dante pull up/down domain. | Signal Indicators | 16 Green LEDs, 8 input/8 output indicators. Illuminate @ -126dBFS. | Clock Source | Orange LED for each: Internal, Word Clock, DARS, Input 1–2 and Input 9–10. |
Network Modes Redundant | Allows unit to connect to two independent networks. | Switched | Connects both ports to integrated network switch allowing daisy-chaining of devices. |
Dimensions Height | 44mm/ 1.73" | Width | 482mm/ 19.98" | Depth | 263mm/ 10.35" |
Weight Power PSU | 2 x Internal, 100-240V, 50/60Hz, consumption 30VA.
|
| 
发表于 2020-3-3
